Check Ground Lead Resistance to Ground [EH8]

Check Ground Lead Resistance To Ground





- Ignition off.
- Disconnect connector C/ED.
- Disconnect control module.

Connect an ohmmeter between #1 and #26 on test box. Ohmmeter should read infinite resistance.

If reading is OK:
- Check if TRACS pressure sensor circuit is short-circuited to supply EH9. Checking (TRACS) Pressure Sensor Circuit Is Shorted to B [EH9]

If reading is incorrect:
- Check lead between hydraulic unit connector C/ED terminal 24 and control module #26 for short-circuit to ground as per HA3. Short Circuit to Ground [HA3]