Test Drive [EK7]

Test Drive

- Ignition on.





- Erase DTC.
- Quit DTM by switching ignition off.

NOTE: Before starting test drive, switch ignition off to quit DTM. If car's speed exceeds 10km/h (6 mph) while DTM is on, the control module will cut the ABS system out.





- Test drive car as per FB. Test drive. Test Driving [FB]

NOTE: If a mechanical or hydraulic fault is found in hydraulic brake system, see table of symptoms for symptoms and how to deal with them.

If DTC does not reoccur:
- Intermittent fault, fault-tracing as per EK8. Intermittent Fault [EK8]

If DTC reoccurs:
- Try another pedal sensor.