G8 Checking Supply (15) to Fuse 11

G8 Checking supply (15) to fuse 11 in the central fuse module




- Switch off ignition.
- Remove fuse 11.
Check fuse and replace if defective.




- Switch ignition on.
- Connect a voltmeter between ground and fusebox pos. 11C/11:2 for fuse 11. The voltmeter should indicate battery voltage.

If value is OK:
Open circuit in cable between fusebox pos. 11C/11:2 and relay base terminal pos. 15.
- Correct fault or replace cable.
Replace fuse 11.
Replace central locking relay D/G.

If the reading is incorrect:
Open circuit in voltage supply cable to fusebox pos. 11C/11:2.
- Correct fault or replace cable.
Replace fuse 11,.
Replace central locking relay D/G.