Clockspring Assembly / Spiral Cable: Adjustments

Adjusting steering wheel position

Adjustment

Removing steering wheel module and steering wheel
- Remove steering wheel module and steering wheel by carrying out the following operations in accordance with Steering wheel module, steering wheel and contact reel, replacement Airbag Steering Wheel Module, Steering Wheel and Contact Reel Replacement , Steering wheel module, steering wheel and contact reel, replacement Airbag Steering Wheel Module, Steering Wheel and Contact Reel Replacement , Steering wheel module, steering wheel and contact reel, replacement Airbag Steering Wheel Module, Steering Wheel and Contact Reel Replacement and Steering wheel module, steering wheel and contact reel, replacement Airbag Steering Wheel Module, Steering Wheel and Contact Reel Replacement.

Zeroing contact reel




- Remove screw from contact reel lock position.




- Turn the contact reel fully to the left.




- First turn the contract reel back two (2) full turns to the right. Then continue turning the contact reel in the same direction, three quarters (3/4) of a turn to the screw hole.
The screw hole should be over the lock position "lock" as illustrated.




- Install screw in contact reel lock position. The contact reel is now zeroed and locked (secured).

Installing steering wheel and steering wheel module
- Install steering wheel and steering wheel module by carrying out the following operations in accordance with Steering wheel module, steering wheel and contact reel, replacement Airbag Steering Wheel Module, Steering Wheel and Contact Reel Replacement and Steering wheel module, steering wheel and contact reel, replacement Airbag Steering Wheel Module, Steering Wheel and Contact Reel Replacement.