Vacuum Vent Valve: Service and Repair

Replacing brake and clutch valves

Removing




- Ignition off.
- Remove soundproofing panel on driver's side.
- Carefully remove brake/clutch valve from bracket.
- Disassemble connector and disconnect vacuum hose from brake/clutch valve.

Installing

Location of Components, Cruise Control (Passenger Compartment):

- Assemble connector and connect vacuum hose to brake/clutch valve.
- Install brake/clutch valve. Check location in bracket.
- Shake (do not pull) brake/clutch valve lightly and check that it is secure.
- Press pedal so that it is not in contact with the brake/clutch valve.
- Pull piston out as far as possible and release pedal slowly. The brake/clutch valve will then adjust itself automatically.
Check function and check that brake/clutch valve is airtight.
- Reinstall soundproofing panel.