Description Of Parameters

Description of parameters

Parameters, status

Locking signal from the driver's door control switch
Displays the position of the key control switch.
HIGH = Control switch not in the locking position.
LOW = Control switch in the locking position.
The control switch grounds the signal when the key is turned to the locking position.

Unlocking signal from the driver's door control switch
Displays the position of the key control switch.
HIGH = Control switch not in the unlocking position.
LOW = Control switch in the unlocking position.
The control switch grounds the signal when the key is turned to the unlocking position.

Locking signal from the childlock switch
Displays the position of the childlock switch.
HIGH = Childlock switch not in the locking position.
LOW = Childlock switch in the locking position.
The childlock switch grounds the signal when it is pressed into the lock position.

Unlocking signal from the childlock switch
Displays the position of the childlock switch.
HIGH = Childlock switch not in the unlocking position.
LOW = Childlock switch in the unlocking position.
The childlock switch grounds the signal when it is pressed into the unlock position.

Locking signal from the childlock switch
Displays the position of the central locking switch.
HIGH = Control switch not in the locking position.
LOW = Control switch in the locking position.
The central locking switch grounds the signal when it is pressed into the lock position.

Unlocking signal from the central locking switch
Displays the position of the central locking switch.
HIGH = Central locking switch not in the unlocking position.
LOW = Central locking switch in the unlocking position.
The central locking switch grounds the signal when it is pressed into the unlock position.

Signal from the door switch, driver's door
Displays the position of the door switch in the driver's door.
HIGH = Door closed.
LOW = Door open
The door switch grounds the signal when the door opens.

Signal from the door switch, other doors
Displays the position of the door switch in the three passenger doors.
HIGH = All passenger doors closed.
LOW = A passenger door is open
The door switch for the each passenger door grounds the signal when one of the doors is opened.

Signal from the door switch, trunk lid or tailgate
Displays the position of door switch in the trunk lid or tailgate.
HIGH = Trunk lid or tailgate closed.
LOW = Trunk lid or tailgate open
The door switch grounds the signal when the trunk lid or tailgate opens.

Signal from the hood switch
Displays the position of the hood switch.
HIGH = Hood open.
LOW = Hood closed.
The hood switch grounds the signal when the hood is closed.

Signal from the tilt sensor
Displays the status of the tilt sensor
HIGH = Tilt sensor not affected.
LOW = Tilt sensor in the alarm position.
The signal will be low when the car angle of lean exceeds the limit for the alarm when the alarm is armed.

Signal from the switch on the ignition switch
Displays whether the key is in the ignition switch.
HIGH = Key in the ignition switch.
LOW = Key not in the ignition switch.
This applies to US/CDN models, for other models the signal applies to the key being in ACC position or not.

Signal from the childlock
Displays the position of the childlocks.
HIGH = A door is not locked in the child safe position.
LOW = Both doors locked in the child safe position.
The signal is grounded when both the rear passenger doors are locked in the child safe position.

Signal from the switch for reduced alarm mode

Note! Applies from 2001 model year inclusive

Displays the position of the switch.
HIGH = Switch not affected.
LOW = Switch depressed.