Audible Warning Device: Service and Repair

Switch with buzzer, replacing

Removal

Switch with buzzer
Remove the driver's seat. See (-1999) or Front seat, replacing Front Seat, Replacing (2000-).




- Cut off the tie straps
- Disconnect the cable from the mounting.





Remove
- the screws and the nuts
- the micro-switch with the buzzer.

Installation

Switch with buzzer




Install the switch in reverse order

Note! The switch button (red) must be at the front.




- Check the function of the switch by connecting 12 V to the connector on the plate
- Move the seat rails to the foremost position, then to the rearmost position to check that the switch with the buzzer is functioning correctly.