Checking For an Open-Circuit, Contact Resistance and Oxidation

Checking for an open-circuit, contact resistance and oxidation

Check the ground terminal and the cables between the ground terminals and control module connector B2 # 1 for an open-circuit according to Checking wiring and terminals. Permanent faults and contact resistance and oxidation according to Checking wiring and terminals. Permanent faults.

Check the ground lead between the battery and the bodywork for an open-circuit according to Checking wiring and terminals. Permanent faults and contact resistance and oxidation according to Checking wiring and terminals. Permanent faults.

Select Continue when the fault has been remedied.