Verification

Verification







HINT: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.

Read off the pulse width modulated signal. Try depressing and releasing the accelerator pedal (AP). Check that the values are correct. The value is approximately 7 % when the accelerator pedal (AP) is unaffected and approximately 85 % when the accelerator pedal (AP) is fully depressed.

For information about signals, see Signal specification.

Do the values correspond?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Continue with Test (See "Fault-Tracing Information - Permanent Fault"). Fault-Tracing Information - Permanent Fault