Connecting the Breakout Box

Connecting the breakout box

Connecting the breakout box to immobilizer connector (A)












- Ignition off
- Remove the control module from the bracket according to Immobilizer control module Immobilizer Control Module
- Disconnect the connector from the control module.




- Connect one of the 10-pin connectors on adapter 981 3194 Replaced by 9511495 981 3194 Replaced by 951 1495 to the connector. Connect breakout box 951 1428 Breakout box 951 1428 Breakout Box to the adapter
- Disconnect the breakout box in reverse order
- For connections in the car and the breakout box see Signal specification Signal Description, Immobilizer.

Continue - FAULT FOUND

-------------------------------------------------