Removal and Replacement

Replacing tail lamps (4 door)

Tail lamps (4 door)




The illustration shows the lamp on the left. The same applies for the lamp on the right, mirror imaged.
For type of bulb Specifications Application and ID.
1= Tail lamps.
2 = Turn signal lamps.
3 = Brake lamps.
4 = Parking lamps (light with tail lamps)./?/
5 = Back-up (reversing) lamps.
6 = Fog tail lamp; (on the left in left-hand drive cars and on the right in right-hand drive cars.)

Replacing the whole tail lamp, 4-door




- Remove the two rear lamp fixings.
- Remove the lamp control module.
- Remove the four mounting screws and remove the lamp by pulling it backwards.
Reinstall in reverse order.
Torque tighten nuts: 7 Nm.

Hint: Check the seals and install during assembly.

- Check the function.