Throttle Body: Service and Repair

Replacing the throttle body (TB)

Removing the throttle body (TB)





Remove:
- the cover for the throttle body (TB)
- the air intake hose
- the throttle cable
- the throttle body (TB) from the intake manifold
- the connector
- the gasket.
Clean the throttle body (TB) and intake manifold and air intake hose.

Installing the throttle body (TB)




Connect the connector to the throttle body (TB).

Install
- the new gasket, secured using the mounting screws
- the throttle body (TB). Tighten to 10 Nm
- the air intake hose.

Note! Ensure that the clamp never comes into contact with the throttle pulley in the idling or wide open throttle (WOT) positions.

Test the function. Reinstall the throttle body (TB) cover.