Seat Cushion, Rear Seat

Seat cushion, rear seat

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing seat upholstery (40%)




Fold the seat cushion forward.
Fold out the molding from the seat frame. See the illustration.
Remove the foam and the upholstery from the seat frame.
Separate the upholstery from the foam. It is secured with 9 clips.

Removing seat upholstery (60%)




Fold the seat cushion forward.
Fold out the molding from the seat frame. See the illustration.
Remove the foam and the upholstery from the seat frame.
Separate the upholstery from the foam. It is secured with 12 clips.

Installation

Installing upholstery on 40 part

Install:
- the upholstery on the foam using 9 clips
- the foam and the upholstery on the seat frame.
Fold the molding in against the seat frame.
Fold the cushion back.

Installing upholstery on 60 part

Install:
- the upholstery on the foam using 12 clips
- the foam and the upholstery on the seat frame.
Fold the molding in against the seat frame.
Fold the cushion back.