9 - Verification

Verification







HINT: After carrying out the repair, check that the fault has been remedied.

- Reinstall the connectors, components, etc.
- Ignition on
- Erase diagnostic trouble codes by clicking the VCT2000 symbol
- Start the car. Allow the car to run for 10 minutes.
- Read off diagnostic trouble codes (DTCs).

Check if a diagnostic trouble codes (DTCs) for communication fault recurs in the central electronic module (CEM).

Does the diagnostic trouble code (DTC) recur?

YES: Refer to Fault-Tracing Information - Permanent Fault. Fault-Tracing Information - Permanent Fault
NO: Refer to Diagnostic Trouble Code Descriptions. Diagnostic Trouble Code Descriptions