Glove Compartment

Glove compartment

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the glove compartment





Remove:
- the end cover. It is secured with 3 hidden clips
- the clip for the air duct.




Remove the panel inside the center console. It is secured with 4 hidden clips.

Hint: Use a weatherstrip tool.





Remove:
- any accessories on the center console
- the 5 screws.

Caution! There is a risk of the center console being scratched.

Hint: Tape the edge of the center console to protect it against scratches.




Pull the glove compartment straight back into the vehicle to release the 2 hidden clips in the top edge.

Note! Note the position of the electric connections.

Disconnect the 2 connectors.




Remove the 4 screws for the inner glove compartment.

Installation

Installing glove compartment





Install:
- the 4 screws for the inner glove compartment. Tighten
- the 2 connectors
- the glove compartment. Guide the glove compartment diagonally inside the center console
- the 2 hidden clips in the top edge of the glove compartment
- the 5 screws
- the clip for the air duct
- the end cover
- the panel inside the center console.
Remove any tape from the center console.