Control Module: Service and Repair

Transmission control module (TCM)

Operation number: 43715-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Note! Make sure that the gear selector is in neutral (N).

Remove the following items:
- battery negative lead. Refer to: Battery, disconnecting Battery Disconnecting
- auxiliary bracket. Refer to: Auxiliary brackets, B6324S Service and Repair





Caution! Make sure that the terminals or pins/sockets of the transmission control module (TCM) and the connectors are not bent or damaged.

Tighten, gear selector mechanism (nut). Refer to Specifications [1][2]Specifications





Installation





Note! Make sure that the installation marks are aligned.

To install, reverse the removal procedure

Order software for the control module. Software Downloading

Calibrate the transmission range sensor.