Transmission, Removing

Transmission, removing

Operation number: 43710-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Removal

Remove the following items:
- the air cleaner (ACL) housing Refer to: Air cleaner housing, B8444S Service and Repair
- the battery. Refer to: Battery Removal and Replacement
- the left drive shaft. Driveshaft Left
- the left hand exhaust pipe. Refer to: Exhaust manifold, left-hand, B8444S Exhaust Manifold, Left-Hand
- the right hand exhaust pipe. Refer to: Exhaust manifold, right-hand, B8444S Exhaust Manifold, Right-Hand.












999 7077 Jimmy bar 999 7077 Jimmy Bar





Remove the bevel gear. Refer to: Bevel gear, B8444S, TF-80SC AWD Bevel Gear.












Turn the next screw forward.





Caution! Make sure that all openings are sealed.




Lower the left hand side of the engine/transaxle approximately 60 mm.









998 5972 JACK 998 5972 Jack
999 5972 FIXTURE 999 5972 Fixture
999 5463 FIXTURE 999 5463 Fixture









Caution! Caution! Make sure that the gearbox is removed straight in relation to the engine to prevent damage to the pilot bearing.

Note! Ensure that the torque converter is removed with the transaxle and does not slide off the stator shaft. Press a screwdriver through one of the screw holes in the flexplate.





Remove the following items:
- the starter motor. Service and Repair
- bracket.