Clockspring Assembly / Spiral Cable: Adjustments

Contact reel driver module, resetting

The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparations





Remove:
- battery cable. See Battery, disconnecting Battery Disconnecting
- the steering wheel according to Steering wheel, replacing Replacing Steering Wheel.

Release contact reel




Remove one screw (Torx 20).




Turn the contact reel counter-clockwise to the end-position.




Turn the contact reel clockwise two complete revolutions. Then turn clockwise until the screw hole is in position "one o'clock" as shown.

Note! On later car models, the yellow marking must also be visible in the window.

Secure contact reel




Install the screw when the contact reel is in its lock position.
The contact reel is now reset and locked (secured).

Installation

Install:
- the steering wheel according to Steering wheel, replacing Replacing Steering Wheel
- the battery cable according to Battery, disconnecting Battery Disconnecting.