A/T Park Pin Switch Test

A/T Park Pin Switch Test

1. Connect the HDS to the DLC (A).

2. Check the Park Pin Switch signal with the HDS in the A/T data list while the shift lever is in P, and when the shift lever is shifted to any position other than P.
The HDS indicates ON while the shift lever is in P, and OFF when the shift lever is out of P. If the park pin switch signal is as specified, the park pin switch circuit is OK. If the park pin switch is not as specified, troubleshoot the key interlock system circuit. Testing and Inspection

NOTE: If the HDS does not communicate with the PCM, troubleshoot the DLC circuit. Testing and Inspection