85-4x

SRS DTC Troubleshooting: 85-4x, 85-5x, 85-63, 85-64

DTC 85-4x, 85-5x ("x" can be 0 thru 9 or A thru F), 85-63, 85-64:

Internal Failure of ODS Unit

NOTE:

- Before doing this troubleshooting procedure review SRS Precautions and Procedures Service and Repair and General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.
- 2-door: Before replacing the SRS unit, check the SRS unit software version with the HDS. If the software version is not the latest, update the SRS unit software SRS Unit Update, and retest.

1. Clear the DTCs with the HDS Reading and Clearing Diagnostic Trouble Codes.

2. Turn the ignition switch to ON (II), then wait for 10 seconds.

3. Check for DTCs with the HDS Reading and Clearing Diagnostic Trouble Codes.

Is DTC 85-4x, 85-5x, 85-63, or 85-64 indicated?

YES -

Go to step 4.

NO -

Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures Reading and Clearing Diagnostic Trouble Codes. If another DTC is indicated, troubleshoot the DTC.�

4. Clear the DTCs with the HDS Reading and Clearing Diagnostic Trouble Codes.

5. Do the ODS unit initialization Programming and Relearning.

6. Turn the ignition switch to ON (II), then wait for 10 seconds.

7. Check for DTCs with the HDS Reading and Clearing Diagnostic Trouble Codes.

Is DTC 85-4x, 85-5x, 85-63, or 85-64 indicated?

YES -

Go to step 8.

NO -

The system is OK.�

8. Replace the ODS unit ODS Unit Replacement.

9. Clear the DTCs with the HDS Reading and Clearing Diagnostic Trouble Codes.

10. Turn the ignition switch to ON (II), then wait for 10 seconds.

11. Check for DTCs with the HDS Reading and Clearing Diagnostic Trouble Codes.

Is DTC 85-4x, 85-5x, 85-63, or 85-64 indicated?

YES -

Replace the SRS unit SRS Unit Replacement.�

NO -

The system is OK.�