Spark Plug: Service and Repair

Spark Plugs

Removal
1 Remove the cover and disconnect the battery ground cable. For additional information, refer to Specifications [1][2]Battery
2 Remove the ignition coil-on-plugs. For additional information, refer to Ignition Coil-On-Plug - Vehicles Without: Supercharger Service and Repair
3 Remove the remaining ignition coil-on-plugs.
4
WARNING: Eye protection must be worn.
Clean the area surrounding the spark plugs.




5 Remove the spark plugs.

Installation
1 Install the spark plugs.
- Tighten the spark plugs to 28 Nm (21 lb.ft).
2 Install the remaining coil-on-plugs.
3 Install the ignition coil-on-plug. For additional information, refer to Ignition Coil-On-Plug - Vehicles Without: Supercharger Service and Repair
4 Connect the battery ground cable and install the cover. For additional information, refer to Specifications [1][2]Battery