Antitheft Antenna: Service and Repair

Antenna

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications
2 Remove the RH B-pillar upper trim panel. For additional information, refer to B-Pillar Upper Trim Panel B-Pillar Upper Trim Panel
3 Remove the RH C-pillar upper trim panel. For additional information, refer to C-Pillar Upper Trim Panel C-Pillar Upper Trim Panel
4 Remove the RH D-Pillar upper trim panel. For additional information, refer to D-Pillar Trim Panel D-Pillar Trim Panel




5 Remove the passenger assist handle.
- Release the 2 screw covers.
- Remove the 2 screws.
- Repeat the above procedure for the other handle.




6 Release the front and rear door weatherstrips for access.




7 Release the liftgate weatherstrip




8 Remove the rear speakers.
- Remove the speaker grilles.
- Remove the 6 screws.
- Disconnect the 2 electrical connectors.




9 Release the headliner for access.
- Release the 2 clips.





10 Remove the alarm antenna.
- Release and disconnect the electrical connector.
- Remove the 2 bolts.

Installation
1 Install the alarm antenna.
- Tighten the bolts to 6 Nm (4 lb.ft).
- Connect and secure the electrical connector.
2 Install the headliner.
- Secure in the clips.
3 Attach the door weatherstrips.
4 Install the passenger assist handles.
- Install the screws.
- Secure the screw covers.
5 Install the rear speakers.
- Connect and secure the electrical connectors.
- Install the screws.
- Install the speaker grilles.
6 Install the D-pillar upper trim panel. For additional information, refer to D-Pillar Trim Panel D-Pillar Trim Panel
7 Install the C-pillar upper trim panel. For additional information, refer to C-Pillar Upper Trim Panel C-Pillar Upper Trim Panel
8 Install the B-pillar upper trim panel. For additional information, refer to B-Pillar Upper Trim Panel B-Pillar Upper Trim Panel
9 Connect the battery ground cable. For additional information, refer to Specifications