Headlamp Washer Pump: Service and Repair

Headlamp Washer Pump

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2 Remove the LH fender splash shield. For additional information, refer to Fender Splash Shield Fender Splash Shield
3 Release the headlamp washer pump hose.
- Drain the washer reservoir fluid.
4 Disconnect the headlamp washer pump electrical connector.




5 Remove the headlamp washer pump.
- Discard the O-ring seal.

Installation
1 Install the headlamp washer pump.
- Install a new O-ring seal.
2 Connect the headlamp washer pump electrical connector.
3 Connect the headlamp washer pump hose.
4 Install the fender splash shield. For additional information, refer to Fender Splash Shield Fender Splash Shield
5 Lower the vehicle.
6 Top-up the windshield washer reservoir.