Work Flow

WORK FLOW
1. Check the symptom and customer's requests.
2. Understand the system description. Refer to SE-11, "System Description". Description and Operation
3. Perform the preliminary check, refer to "PRELIMINARY CHECK".
4. Check the self-diagnosis, results using CONSULT-III refer to "Self-diagnosis Results".
5. Repair or replace depending on the self-diagnostic results.
6. Based on the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "SYMPTOM CHART".
7. Does the automatic drive positioner system operate normally?
If it is normal, GO TO 8.
If it is not normal, GO TO 3.
8. Inspection end.