With Intelligent Key System

BCM (BODY CONTROL MODULE)

Removal and Installation

NOTE:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. With Intelligent Key System.

REMOVAL

1.Remove knee protector. Exploded View.
2.Remove fuse block (J/B).
3.Remove harness clip.
4.Remove screws.
5.Remove BCM and disconnect the connector.
6.Remove the ignition relay and back door lock actuator relay.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to perform "WRITE CONFIGURATION" when replacing BCM. Or not doing so, BCM control function does not operate normally.
NOTE:
Be sure to perform the system initialization (NATS) when replacing BCM. With Intelligent Key System.