947919 Removing and Installing Rear Angle Sensor For Headlight Beam Adjustment

WM 947919 Removing and installing rear angle sensor for headlight beam adjustment

Removing rear angle sensor for headlight beam adjustment

1. The procedure for removing and installing the rear angle sensor for headlight beam adjustment is described under -> 431955 Replacing rear level sensor 431955 Replacing rear level sensor

Calibrating angle sensor for headlight beam adjustment

Information, measuring points, procedure, and conditions for calibration: -> 430115 Calibration 430115 Calibrating the levelling system
1. Connect the Porsche System Tester to the vehicle and start the System Tester. Switch on ignition.
2. Select vehicle type using the cursor keys.
3. Select Level control/PASM using the cursor keys.
4. Select the Maintenance/repairs menu and run the function for calibrating the level sensor.
5. Read out fault memory.