681219 Removing and installing glove compartment lid

WM 681219 Removing and installing glove compartment lid

Preliminary work

Remove glove compartment. -> 681519 Removing and installing glove compartment - section on "Removing" 681519 Removing and installing glove compartment

Removing glove compartment lid

1. Pull out cotter pin -1- at insulation for lid -2- on both sides -arrow-.





Removing cotter pin at insulation for lid

2. Drive hinge bolts out towards the centre -arrow-.





Driving out hinge bolts on glove compartment lid

3. Remove glove compartment lid.

Installing glove compartment lid

The glove compartment lid is installed in reverse order to removal.

Subsequent work

Install glove compartment. -> 681519 Removing and installing glove compartment - section on "Installing" 681519 Removing and installing glove compartment