853019 Removing and installing heater/fresh-air blower motor

WM 853019 Removing and installing heater/fresh-air blower motor

Preliminary work

1. Remove cover in footwell on the passenger's side. -> 702219 Removing and installing cover under dashboard - section on "Removing" 702219 Removing and installing cover under dashboard

Removing heater/fresh-air blower motor





Installation position of blower motor

1. Unclip footwell outlet vent on passenger's side -1- from the bracket -2- and pull it off the air guide -3-.





Removing footwell outlet vent

2. Unscrew five fastening screws -1- on the blower motor cover -2-.





Removing blower motor cover

3. Unscrew two fastening screws -4- on the blower motor -3-.





Removing blower motor

4. Release electric plug connection on the blower motor -a- and pull it off -A-.





Unplugging connector from blower motor

Installing heater/fresh-air blower motor

1. Plug in electric plug connection on the blower motor -A- until the connector engages securely.





Plugging in connector on blower motor

2. Screw in two fastening screws -4- on the blower motor -3-.





Installing blower motor

3. Screw in five fastening screws -1- on the blower motor cover -2-.





Installing blower motor cover

4. Attach footwell outlet vent -1- to the air guide -3- and clip it into the bracket -2-.





Installing footwell outlet vent

Subsequent work

1. Install cover in footwell on the passenger's side. -> 702219 Removing and installing cover under dashboard - section on "Installing" 702219 Removing and installing cover under dashboard