976119 Removing and installing wire harness for auxiliary heating

WM 976119 Removing and installing wire harness for auxiliary heating

Information

Installation position





Installation position of wire harness for auxiliary heating

Removing and installing wire harness for auxiliary heating

Preliminary work

1. Remove auxiliary heater -> 822019 Removing and installing complete heater - section on "Removing" Service and Repair.

Removing wire harness for auxiliary heating

1. Release and pull off connector -1- on the shut-off valve.





Shut-off valve connector

2. Loosen clip -1- on the circulating pump holder.





Clip on circulating pump holder

3. Release and disconnect connector -1- on circulating pump.





Circulating pump connector

Installing wire harness for auxiliary heating

1. Installation is performed in reverse order.

Subsequent work

1. Install auxiliary heater -> 822019 Removing and installing complete heater - section on "Installing" Service and Repair.