Cabin Temperature Sensor / Switch: Service and Repair

WM 885419 Removing and installing temperature sensor

Information

Installation position of temperature sensor





Installation position of temperature sensor for additional air conditioning





Preliminary work

1. Disconnect battery ground strap. -> 2X00IN Work instructions after disconnecting the battery - section on "Disconnecting" 2X00IN Work instructions after disconnecting the battery
2. Remove centre part and left side panel of luggage compartment cover. -> 700619 Removing and installing luggage compartment trim (luggage compartment cover) - section on "Removing"
3. Remove left side trim panel for rear luggage compartment. -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "Removing" Service and Repair

Removing temperature sensor

Information

There are two temperature sensors in the air guide. The steps required for removing the left temperature sensor are described here. Complete the steps accordingly for the right temperature sensor.

1. Loosen the screw -1- on the left support for the luggage compartment cover and remove the support -2-.





Removing support for luggage compartment cover

2. Loosen the temperature sensor -1- by turning it approx. 90° clockwise and remove it.





Removing temperature sensor

3. Release and pull off connector on the temperature sensor.

Installing temperature sensor

1. Installation is performed in reverse order.

Subsequent work

1. Fit left side trim panel for rear luggage compartment. -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "Installing" Service and Repair
2. Fit centre part and left side panel of luggage compartment cover. -> 700619 Removing and installing luggage compartment trim (luggage compartment cover) - section on "Installing"
3. Connect battery ground strap. -> 2X00IN Work instructions after disconnecting the battery - section on "Connecting" 2X00IN Work instructions after disconnecting the battery