Operation CHARM: Car repair manuals for everyone.

Discharge Air Temperature Sensor / Switch: Service and Repair


WM 875819 Removing and installing temperature sensor

Information

Component overview





Installation positions of temperature sensors





Preliminary work

Preliminary work for temperature sensor in side vents

1. Remove dashboard cover. -> 701619 Removing and installing dashboard cover - section on "Removing"

Preliminary work for temperature sensor in footwell outlet vents

1. Remove cover under dashboard. -> 702219 Removing and installing cover under dashboard - section on "Removing" 702219 Removing and installing cover under dashboard

Preliminary work for temperature sensor in centre air vents

1. Remove PCM 3.1 display and operator control unit. -> 911019 Removing and installing PCM 3.1 display and operator control unit - section on "Removing" 911019 Removing and installing PCM 3.1 display and operator control unit

Preliminary work for temperature sensor in pollen filter housing

1. Remove footwell outlet vent at the front right. -> 805519 Removing and installing front footwell outlet vent - section on "Removing" 805519 Removing and installing front footwell outlet vents

Removing temperature sensor

Removing temperature sensor in side vents

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Turn the temperature sensor -1- by 90° and remove it.





Removing temperature sensor

2. Release electric plug connection on temperature sensor -1- ( -a- ) and pull it off -A-.

Removing temperature sensor in footwell outlet vents

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Turn the temperature sensor -1- by 90° and remove it.





Removing temperature sensor

2. Release electric plug connection on temperature sensor -1- ( -a- ) and pull it off -A-.

Removing temperature sensor in centre air vents

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Turn the temperature sensor -1- by 90° and remove it.





Removing temperature sensor

2. Release electric plug connection on temperature sensor -1- ( -a- ) and pull it off -A-.

Removing temperature sensor in pollen filter housing

1. Turn the temperature sensor -1- by 90° and remove it.





Removing temperature sensor

2. Release electric plug connection on temperature sensor -1- ( -a- ) and pull it off -A-.

Installing temperature sensor

Installing temperature sensor in side vents

The temperature sensor in the side vents is installed in reverse order to removal.

Installing temperature sensor in footwell outlet vents

The temperature sensor in the footwell outlet vents is installed in reverse order to removal.

Installing temperature sensor in centre air vents

The temperature sensor in the centre air vents is installed in reverse order to removal.

Installing temperature sensor in pollen filter housing

The temperature sensor in the pollen filter housing is installed in reverse order to removal.

Subsequent work

Subsequent work for temperature sensor in side vents

1. Install dashboard cover. -> 701619 Removing and installing dashboard cover - section on "Installing"

Subsequent work for temperature sensor in footwell outlet vents

1. Install cover under dashboard. -> 702219 Removing and installing cover under dashboard - section on "Installing" 702219 Removing and installing cover under dashboard

Subsequent work for temperature sensor in centre air vents

1. Install PCM 3.1 display and operator control unit. -> 911019 Removing and installing PCM 3.1 display and operator control unit - section on "Installing" 911019 Removing and installing PCM 3.1 display and operator control unit

Subsequent work for temperature sensor in pollen filter housing

1. Install footwell outlet vent at the front right. -> 805519 Removing and installing front footwell outlet vent - section on "Installing" 805519 Removing and installing front footwell outlet vents