Removal and Replacement

WM 340155 Changing transmission oil

Tools





Technical values





Preliminary work

Preliminary work for transmission oil

1. Remove engine guard. -> 108019 Removing and installing engine guard - section on "Removing" 108019 Removing and installing engine guard

Changing transmission oil

1. Place oil collecting container underneath the vehicle.

WARNING

Hot fluid

- Danger of scalding

-> Let the fluid cool down.
-> Wear personal protective gear.

Information

- Secure vehicle to prevent it rolling away.

- Vehicle must be horizontal in order to change transmission oil.

2. Unscrew oil drain plug -arrow- and drain transmission oil.





Oil drain plug

3. Screw in oil drain plug -arrow- with a new sealing ring. => Tightening torque: 35 Nm (26 ftlb.)
4. Unscrew oil inspection plug -arrow-.





Oil inspection plug

Information

Use only oil approved by Porsche.

5. Use manual metering pump WE 1372 to fill in oil up to the lower edge of the inspection opening -arrow-. => Change quantity: 1.8 litres
6. Screw in oil inspection plug -arrow- with a new sealing ring. => Tightening torque: 35 Nm (26 ftlb.)

Subsequent work

Subsequent work for transmission oil

1. Install engine guard. -> 108019 Removing and installing engine guard - section on "Installing" 108019 Removing and installing engine guard