644655 Replacing rear window guide

WM 644655 Replacing rear window guide

Preliminary work

1. Remove moulding for rear door. -> 66331903 Moulding for rear door - section on "Removing" 66331903 Removing and installing trim strip for rear door

Removing rear window guide

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Unclip rear window guide.





Unclipping rear window guide

2. Remove cover for rear door. -> 669419 Removing and installing covers for rear door - section on "Removing" 669419 Removing and installing covers for rear door
3. Pull the window guide completely off the door frame.





Pulling off window guide

Installing rear window guide

Information

To make it easier to install the window guide in the door channel area, this section of the window guide must be moistened with a soapy solution.

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Position and fit the window guide on the rear door window frame at the top.
Do not kink or bend the window guide out of shape during installation.





Fitting window guide

2. Install cover for rear door. -> 669419 Removing and installing covers for rear door - section on "Installing" 669419 Removing and installing covers for rear door
3. Fit window guide on door window frame.
Check that the window guide is seated securely.





Fitting window guide

4. Clip in rear window guide. Check that it is seated correctly.
Replace damaged clips.





Clipping in rear window guide

Subsequent work

1. Install moulding for rear door. -> 66331903 Moulding for rear door - section on "Installing" 66331903 Removing and installing trim strip for rear door