Installation

DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR: INSTALLATION

INSTALLATION

1. INSTALL POWER BACK DOOR TOUCH SENSOR ASSEMBLY
(a) Tie the string to the wire near the connector of the power back door touch sensor assembly.
HINT: Use the string that was left in the door during removal of the touch sensor assembly.





(b) Pull the string to help pass the connector through the inside of the back door frame.





(c) Engage the 2 clips.
(d) Install the power back door touch sensor assembly with the 5 bolts.
(e) Connect the connector.
2. INSTALL BACK DOOR TRIM COVER Reassembly
3. CONNECT POWER BACK DOOR ROD (for LH Side) Reassembly
4. INSTALL BACK DOOR PANEL TRIM ASSEMBLY Reassembly
5. INSTALL UPPER BACK WINDOW PANEL TRIM Reassembly