Installation

1AR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket to the sensor.





Text in Illustration





(b) Install the engine coolant temperature sensor.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER CASE Installation

3. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY Installation

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

5. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY Installation

6. ADD ENGINE COOLANT Service and Repair

7. INSPECT FOR COOLANT LEAK Testing and Inspection

8. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

9. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

10. INSTALL WINDSHIELD WIPER MOTOR AND LINK

(a) Install the windshield wiper motor and link Installation.

11. INSTALL NO. 2 ENGINE UNDER COVER

12. INSTALL NO. 1 ENGINE UNDER COVER