With Manufacturer Scan Tool

Check DTC memory (Function 02)


NOTE: The VAG 1552 Mobile Scan Tool (ST) can be used instead of the VAG 1551 Scan Tool (ST), however a printout is not possible.

- Connect VAG 1551 scan tool. Refer to "Selectable Functions When Using VAG 1551", under "Restraint Systems", Scan Tool Connecting and Initial Checks
- Initiate Rear spoiler On Board Diagnostic (OBD). Rear Spoiler On Board Diagnostic (OBD), Initiating Program

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -2- to select "Check DTC Memory" function 02.

Indicated on display


Rapid data transfer Q
02 - Check DTC Memory


- Press "PRINT" button.
- Press -Q- button to confirm input.

Indicated on display (number of stored DTCs).


X DTC recognized ->


The stored DTCs are displayed and printed out one after the other.

If a DTC is recognized:

- Repair malfunction.
- Erase DTC Memory (function 05).
- Check DTC memory again (function 02).

Malfunctions printed out can be repaired with the aid of the DTC table. Rear Spoiler

Indicated on display


No DTC recognized ->


If "No DTC recognized" is indicated on the display, press the -> button to return to the "Select function XX" prompt.

Indicated on display


Rapid data transfer HELP
Select function XX


If something else is displayed See Scan Tool (ST) operating instructions.
- End output (function 06).