Instrument Cluster / Carrier: Description and Operation

Instrument Cluster

General Information

The following components are integrated in the instrument cluster:

• Instrument Cluster Control Module (J285)

• Anti-Theft Immobilizer Control Module (J362)

• Speedometer (G21)

• Tachometer (G5)

• Fuel gauge (G1)

• Engine coolant temperature (ECT) gauge (G3)

• Multi-function indicator (MFI)

• Indicator lamps, refer to --> [ Instrument Cluster Indicator Lamps ] Instrument Cluster Indicator Lamps

To audibly support the visual displays of the instrument panel insert, the Instrument Cluster Control Module (J285) activates a warning buzzer.

All control lamps are equipped with Light-Emitting Diodes (LEDs). Servicing the instrument cluster is not planned. In the event of malfunctions, the complete instrument cluster must be replaced. Refer to --> [ Instrument Cluster ] Instrument Cluster.

The Data Bus On Board Diagnostic Interface (J533) (Gateway) is designed as a separate control module and not a component of the instrument cluster as it is for various other vehicles. Refer to --> [ Data Bus On Board Diagnostic Interface ] Description and Operation.

DTC recognition and display

The instrument cluster is equipped with On Board Diagnostic (OBD) capabilities.

Use the "Guided Fault Finding" function on the for fault finding.