Checking Resistance In Wheel Sensor Circuit [EF2]

Checking Resistance In Wheel Sensor Circuit





- Ignition off.
- Connect test box and check ground points as per JA. Connecting Test Box [JA]





- Connecting test box.
- Disconnect control module.

Connect an ohmmeter to test box between:
- #27 and #45 (DTC 3-1-4)
- #28 and #46 (DTC 3-1-3)
- #29 and #47 (DTC 3-1-2)
- #30 and #48 (DTC 3-1-1).

Ohmmeter should read 1040-1160 Ohms.

If reading is OK:
- Check signal lead EF9. Check Signal Lead [EF9]

If reading is incorrect:
- Check resistance in wheel sensor EF3. Check Resistance In Wheel Sensor [EF3]