Checking Control Module [EL23]

Checking Control Module

- Ignition on.





- Erase DTC.
- Quit DTM by switching off ignition.

NOTE: Before test-driving, switch ignition off to quit DTM. If car speed exceeds 10 km/h (6 mph) with diagnostic system on, the control module will disconnect the ABS system.





- Test drive car as per FB. Test drive. Test Driving [FB]

If DTC does not recur:
- Intermittent fault, fault-tracing as per EL24. Intermittent Fault [EL24]

If DTC recurs:
- Try another control module as per ND. Control module, replacement. Service and Repair