Checking Brake Shoes and Cables

Checking brake shoes and brake cables

Checking brake shoes and brake cables
Check the adjustment of the brake cable. If necessary, adjust according to Adjusting the parking brake Adjustments.





Were the brake shoes and the brake cables properly adjusted?

Yes - No Fault Found

No - Verification

-------------------------------------------------

Verification




Verification

Verification

Hint: After carrying out the repair, check that the fault has been remedied as follows.








- Switch off the ignition.
- Reinstall the connectors, components etc.
- Raise the car so that all wheels are clear of the ground.





Check that all wheels can be turned by hand. The brakes must not be applied.

OK - VERIFIED

Not OK - VERIFICATION FAILED

------------------------

VERIFIED - FAULT FOUND

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should be diagnosed and remedied. Since this is not the case the fault-tracing process has failed.
Complete the fault-tracing for those fault or try again.

Do you want to terminate fault-tracing at this time?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

Attempt New Test - Checking brake shoes and brake cables

FAULT-TRACING FAILED - FAULT-TRACING FAILED

-------------------------------------------------