Parking Brake Lever: Service and Repair

Parking Brake Lever Replacement

1. Release the parking brake lever fully.

2. Remove the center console. Center Console Removal/Installation

3. Disconnect the parking brake switch connector (A) from the parking brake switch (B), then remove the harness clip (C).

4. Remove the parking brake lever mount bolts (D).

5. Disconnect the parking brake cables (E) from the equalizer (F), then remove the parking brake lever (G).

6. Remove the parking brake switch.

7. Install the parking brake lever in the reverse order of removal.
NOTE: Do not scratch the coating on the link cable while handling and assembling the parking brake lever.

8. Adjust the parking brake. Adjustments