Alarm Module: Service and Repair

Immobilizer-keyless Control Unit Replacement

1. Remove the driver's dashboard undercover, Driver's Dashboard Undercover Removal/Installation then remove the dashboard lower cover. Driver's Dashboard Lower Cover Removal/Installation

2. Remove the steering column covers. Steering Column Cover Removal/Installation

3. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).

4. Remove the two screws and the immobilizer-keyless control unit.

5. Install the immobilizer-keyless control unit in the reverse order of removal.

6. After replacement, register the immobilizer-keyless control unit, Programming and Relearning and make sure the immobilizer system works properly.

7. Program all of the client's keys/keyless transmitters. Programming and Relearning