Intermediate Shaft Removal

Intermediate Shaft Removal

1. Drain the transmission fluid, then reinstall the drain plug with a new sealing washer:
- Manual transmission Service and Repair

- Automatic transmission ATF Replacement

2. Remove the right driveshaft. Driveshaft Removal

3. M/T model: Remove the CKP sensor cover (A) from the engine block.






4. Remove the flange bolt (A) and the two dowel bolts (B).






5. Remove the intermediate shaft (A) from the differential. Hold the intermediate shaft horizontal until it is clear of the differential to prevent damaging the oil seal (B).