Windshield Washer Fluid Reservoir, Lines and Nozzle Overview
Windshield Washer Fluid Reservoir, Lines and Nozzle Overview
Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Service Precautions.
1 Windshield Washer Fluid Level Sensor (G33)
• Removing and installing, refer to => [ Windshield Washer Fluid Level Sensor (G33) ] Service and Repair.
2 Sealing Grommet
• Replace if damaged.
3 Screw
4 Screw
5 Screw
• 8 Nm
6 Screw
• 8 Nm
7 Filler Tube
• For washer fluid reservoir.
• Removing and Installing, refer to => [ Washer Fluid Reservoir Filler Neck ] Washer Fluid Reservoir Filler Neck.
8 Cover
• For the filler neck.
9 Water Hose
• For windshield washer system.
10 Right Washer Nozzle
• Vehicles with right washer nozzle heater (Z21).
• Removing and installing, refer to => [ Windshield Spray Nozzles ] Service and Repair.
• Adjusting, refer to=> [ Windshield Spray Nozzles, Adjusting and Cleaning ] Windshield Spray Nozzles, Adjusting and Cleaning.
11 Left Washer Nozzle
• Vehicles with left washer nozzle heater (Z20).
• Removing and installing, refer to => [ Windshield Spray Nozzles ] Service and Repair.
• Adjusting, refer to=> [ Windshield Spray Nozzles, Adjusting and Cleaning ] Windshield Spray Nozzles, Adjusting and Cleaning.
12 Grommet
• For the windshield washer fluid hose inside the hood.
13 Grommet
• For the windshield washer fluid hose on the fender.
14 Sealing Grommet
• Replace if damaged.
15 O-ring
• Replace if damaged.
16 Washer Fluid Reservoir
• Removing and installing, refer to => [ Washer Fluid Reservoir ] Washer Fluid Reservoir.
17 Securing Tab
• For the mount inside the fender end plate.
18 Windshield Washer Pump (V5)
• Removing and installing, refer to => [ Windshield Washer Pump (V5) ] Service and Repair.
19 Sealing Grommet
• Replace if damaged.
Washer Fluid Reservoir, Tightening Specifications and Sequence
- Tighten the washer fluid bolts in the sequence specified:
- Tighten the bolt - 3 - to 7 Nm.
- Tighten the bolt - 4 - to 7 Nm.