Rear Seat Removal/Installation

Rear Seat Removal/Installation

NOTE: Take care not to scratch the body or tear the seat covers.

Seat cushion

1. Remove the bolt from the slit in the seat cushion (A).






2. Pull the seat hook knobs (A) while pushing down on the seat cushion (B) to release the hooks (C).





3. Pull up the seat cushion to release the seat belt buckles (D) from their slots (E), and remove it.

4. Install the seat cushion in the reverse order of removal, and note these items:

- Before attaching the seat cushion, make sure there are no twists or kinks in the seat belts.
- When installing the seat cushion, slip the seat belt buckles through the slits in the seat cushion.

Seat-back

1. Remove the rear seat cushion Rear Seat Removal/Installation.

2. Remove the center seat belt anchor bolt (A).






3. Remove the bolts and the pivot shaft (A) from the seat-back beam (B), then remove the seat-back (C) both sides.

Left side





Right side





4. Install the seat in the reverse order of removal, and before attaching the rear seat-back, make sure there are no twists or kinks in the seat belts.