Air Bag Deactivation Indicator: Service and Repair

Passenger's Airbag Cutoff Indicator Replacement

1. With navigation: Remove the dashboard center vent Dashboard Center Vent Removal/Installation (With Navigation).

2. Without navigation: Remove the audio unit Audio Unit Removal/Installation (With Navigation).

3. Disconnect the 6P connector (A) from the passenger's airbag cutoff indicator (B).





4. Push out the passenger's airbag cutoff indicator from behind the dashboard center vent/audio unit (C).

5. Reinstall the parts in the reverse order of removal.

6. After installing the passenger's airbag cutoff indicator, confirm proper system operation:

- Clear any DTCs with the HDS.
- Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.