C1D23

C1D23 E-SUS CONTROL UNIT





Description
Performs good/no good judgment of the E-SUS control unit reprogramming.




DTC Logic

DTC DETECTION LOGIC






DTC REPRODUCTION PROCEDURE
1.DTC REPRODUCTION PROCEDURE
With CONSULT-III
1. Turn the ignition switch OFF to ON.
2. Perform "E-SUS" self-diagnosis.
Is DTC "C1D23" detected?
YES - Proceed to diagnosis procedure. C1D23.
NO - INSPECTION END




Diagnosis Procedure
1.PERFORM E-SUS CONTROL UNIT REPROGRAMMING
With CONSULT-III
Reprogram E-SUS control unit.
Is it completed successfully?
YES - GO TO 2.
NO - GO TO 3.
2.PERFORM SELF-DIAGNOSIS
With CONSULT-III
Perform "E-SUS" self-diagnosis.
Is DTC "C1D23" detected?
YES - GO TO 3.
NO - INSPECTION END
3.PERFORM E-SUS CONTROL UNIT REPROGRAMMING AGAIN
With CONSULT-III
1. Reprogram E-SUS control unit.
2. Perform "E-SUS" self-diagnosis.
Is DTC "C1D23" detected?
YES - Replace E-SUS control unit. Exploded View.
NO - GO TO 4.
4.ERASE ERROR RECORD
Erase the memory of E-SUS control unit self-diagnosis result (history).
- End