Removal and Installation

CVT SHIFT SELECTOR

Removal and Installation


REMOVAL

1.Apply the parking brake.

CAUTION:
Make sure the vehicle cannot move with the parking brake applied.
2.Disconnect the battery negative terminal. Refer to "Exploded View" Exploded View.
Revision: March 20122013 Infiniti JX





3.Remove shift lock override button cover (1) using suitable tool, and insert suitable tool into opening (A) to depress the shift lock override button. Move CVT shift selector to "N" position while depressing shift lock override button.










4.Slide shift selector boot (3) downward.

CAUTION:
Be careful not to damage shift selector boot.
5.Pull shift selector handle clip (2) out of CVT shift selector handle (1).
6.Remove CVT shift selector handle (1).
7.Remove center console assembly. Refer to "Removal and Installation" Removal and Installation.
8.Depress shift lock override button and move CVT shift selector to "P" position.





9.Remove control cable (1) from CVT shift selector assembly (2).
10.Remove CVT shift selector assembly nuts (black arrow), using suitable tool.





11.Disconnect CVT shift selector harness connector (A), using a suitable tool.
12.Remove CVT shift selector assembly from the vehicle.
13.Remove shift lock unit from CVT shift selector assembly.

INSTALLATION

Installation is in the reverse order of removal.
Revision: March 20122013 Infiniti JX





- When installing control cable (1) to CVT shift selector assembly (2), check that control cable is fully pressed in with the ribbed surface (A) facing upward.
NOTE:
Apply multi-purpose grease to control cable eye before assembly.
- Adjust control cable as necessary. Refer to "Inspection and Adjustment" Inspection.