With Generic Scan Tool

HOW TO ERASE EMISSION-RELATED DIAGNOSTIC INFORMATION

With GST

NOTE: If the DTC is not for A/T related items, (Alphabetical Index) skip step 2.

1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
2. Perform "HOW TO ERASE DTC (WITH GST)", (The DTC in the TCM will be erased.)With Generic Scan Tool
3. Select MODE 4 with GST. (The DTC in the ECM will be erased.)