U0405

U0405 LDP) ICC CAM CAN CIR1





DTC Logic

DTC DETECTION LOGIC

DTC Detection Logic:

DTC CONFIRMATION PROCEDURE
1.DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
GO TO 2.
2.DTC CONFIRMATION
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC "U0405" detected?
YES - Refer to U0405.
NO - Refer to How to Perform Efficient Diagnosis For an Electrical Incident.




Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS OF ICC SENSOR INTEGRATED UNIT
Perform ICC sensor integrated unit self-diagnosis with CONSULT-III.
Is any DTC detected?
YES - GO TO 2.
NO - GO TO 4.
2.ICC SENSOR INTEGRATED UNIT TROUBLE DIAGNOSIS
Perform trouble diagnosis of ICC sensor integrated unit. Refer to Testing and Inspection.
GO TO 3.
3.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U0405" erased?
YES - INSPECTION END
NO - Replace ABS actuator and electric unit (control unit).
4.PROVISIONAL REPLACEMENT OF ICC SENSOR INTEGRATED UNIT
Remove ICC sensor integrated unit. Install a normal ICC sensor integrated unit.
GO TO 5.
5.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U0405" erased?
YES - Replace ICC sensor integrated unit.
NO - Replace ABS actuator and electric unit (control unit).